These forged 16″ BBS RG wheels measure 7.5" wide in the front and 8.5" in the rear, and were manufactured by BBS in Germany. The faces are powder-coated in silver with polished lips. Dimensions, offsets, and other manufacturer casting marks can be seen around the hubs under the center caps. The wheels feature a 66.65 center bore and 5x112 bolt pattern which is an exact fit for Mercedes-Benz cars. Four authentic BBS center caps are included along with original German ABE papers. These rare BBS wheels are now offered by the seller in Samobor, Croatia with economy shipping to the U.S., Canada, Europe, and Japan available for $550. Additional shipping locations can be quoted by the seller.
These single-piece BBS wheels can fit a wide variety of Mercedes-Benz models from the 80's and 90's. The wheels have been professionally refinished with silver powder-coated faces and hand-polished lips. Prior to the refinish, the wheels were reportedly in excellent factory condition and the original gold paint was chemically stripped. Post refinishing the wheels now show without any blemishes or imperfections.
The front wheels measures 7.5" wide with an offset of +22, while the rear wheels measure 8.5" wide with an offset of +21. Photos of the back of the wheels are viewable in the gallery with detailed images of the hub under the center caps. The seller notes the size markings on one of the rear wheels is not visible due to the powder-coated finish. All four wheels feature a 5x112mm bolt pattern with a 66.65 center bore for Mercedes-Benz vehicles.
Authentic BBS center caps are also provided with the wheels and pictured in the gallery. "Geschmiedet" is stamped on each wheel meaning "forged" in German. Original German ABE papers are included which confirm the homologation and legality of the wheels for use on the road.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
23 Comments
Congratulations buyer ! I lost merging on the freeway!You guys are killing me! Was trying to get a bid in up to $3k lol$3,550 bid placed by @zyyzs
$3,500 bid placed by @Sergiss
$3,450 bid placed by @zyyzs
$3,400 bid placed by @Sergiss
$3,350 bid placed by @zyyzs
$3,300 bid placed by @Sergiss
$3,250 bid placed by @zyyzs
$3,200 bid placed by @Sergiss
$3,150 bid placed by @zyyzs
$3,100 bid placed by @Sergiss
$3,050 bid placed by @zyyzs
$3,000 bid placed by @Sergiss
$2,950 bid placed by @zyyzs
$2,900 bid placed by @Sergiss
$2,850 bid placed by @zyyzs
$2,800 bid placed by @Sergiss
$2,750 bid placed by @zyyzs
$2,700 bid placed by @Sergiss
$2,650 bid placed by @zyyzs
$2,600 bid placed by @Sergiss
$2,550 bid placed by @zyyzs
$2,500 bid placed by @Sergiss
$2,450 bid placed by @zyyzs
$2,400 bid placed by @Sergiss
$2,350 bid placed by @zyyzs
$2,300 bid placed by @Sergiss
$2,250 bid placed by @zyyzs
$2,200 bid placed by @Sergiss
$1,900 bid placed by @zyyzs
$1,850 bid placed by @Coupersec
$1,800 bid placed by @Sergiss
$1,600 bid placed by @Gibbsy1
$1,500 bid placed by @Sergiss
$1,200 bid placed by @Coupersec
@Sergiss You're welcome! I'm glad the information was helpful. If you have any more questions or need further assistance, feel free to ask.@Lukas2013, thank you for the well detailed breakdown.@Sergiss Tires: Front tires: 225/45 R16 Rear tires: 245/45 R16 1. Difference in width: Front tire has a width of 225 mm. Rear tire has a width of 245 mm. Difference in width: 245 mm - 225 mm = 20 mm The rear tires are 20 mm wider, which means they will appear visually "fuller" compared to the front ones. 2. Difference in overall diameter: To calculate the overall diameter of the tire, we use the following formula: Overall diameter = (profile height x 2) + rim diameter We calculate the profile height by multiplying the tire width by the profile percentage. Front tire (225/45 R16): Width: 225 mm Profile: 45% of the width Profile height = 225 mm x 0.45 = 101.25 mm Overall diameter = (101.25 mm x 2) + 16" (16" = 406.4 mm) Overall diameter = 202.5 mm + 406.4 mm = 608.9 mm Rear tire (245/45 R16): Width: 245 mm Profile: 45% of the width Profile height = 245 mm x 0.45 = 110.25 mm Overall diameter = (110.25 mm x 2) + 16" (16" = 406.4 mm) Overall diameter = 220.5 mm + 406.4 mm = 626.9 mm 3. Difference in diameter: The difference in diameter between the rear and front tire = 626.9 mm - 608.9 mm = 18 mm The rear tires have an overall diameter that is 18 mm larger, which means the rear wheels will be slightly bigger in diameter and also appear visually fuller due to the wider width. The rear tires are 20 mm wider and have an overall diameter 18 mm larger than the front ones, which means they will visually fill the rear wheel arch more and give the vehicle a wider, fuller look, especially if the vehicle is not overly lowered or modified.@lukas2013, Thank you for the quick response. My apologies, as I overlooked the shipping info. Based on my last question with respect to the fitment for the 1986 190E 2.6, and your tire size recommendations, will these fill the wheel well with a clean look? I see you recommended a slightly smaller (45) in the rear.@Sergiss Thank you for your interest! Yes, I have shipped to the U.S. multiple times, and the shipping cost is $550, as stated in the auction description. I'm glad to see the interest growing – these are quite unique wheels that aren’t often available, so it’s not surprising they’re getting attention.$1,100 bid placed by @Sergiss
@lukas2013, looks like the interest is gaining. Have you shipped to the US before, or do you have any idea about how much the shipping would cost?@Eddie210 Thank you for your inquiry! Based on the available information, the 16" 5x112 wheels (7.5J ET22 front and 8.5J ET21 rear) should fit your 1998 Mercedes E320 W210 without any issues. While the offset is slightly lower than the factory specs, this should not cause any problems during installation. If you have any further questions, feel free to reach out. Best regards!Would this fit on 1998 e320 w210? I looked it up and i saw one with the same exact wheels I think so I’m pretty sure they will but just wanna make sure before I place a bid. Thank you$1,050 bid placed by @zyyzs
$1,000 bid placed by @Coupersec
@MNad As a courtesy, if payment is made immediately after the auction, I will be able to store the wheels for you until June.@Lukas2013 NO SHIPPING NEEDED, I will pick up in person at your house in Samobor!@MNad Thank you for your interest! If you win the auction, I can arrange shipping immediately after the sale is completed. Feel free to reach out if you have any further questions.in case I get the wheels, would you hold them until June, I would pick them up...$888 bid placed by @MNad
$777 bid placed by @dennyleeb
$666 bid placed by @zyyzs
$616 bid placed by @MedianMB
@RADSTR Yes, the wheels will fit the 1985 Mercedes 300TD. If you have any further questions, feel free to ask!@Sergiss Thank you for your question. The wheels will fit your vehicle without the need for any modifications or spacers. As for tire recommendations, for the front wheels, I would suggest the following sizes: 225/45 R16 225/50 R16 For the rear wheels, I recommend: 245/45 R16 These tire sizes will provide an excellent fit and performance. If you have any further questions, feel free to ask!$500 bid placed by @zyyzs
Will these fit a 1985 300TD? Thank you.@lukas2013, Thank you for your response. Would they fit right on or would they require any mods to fit like spacers? Also, which tires would you reccomend?@Sergiss Hello, Thank you for your comment on the wheels! These wheels will fit your vehicle. If you have any further questions, feel free to ask! ThanksHello there, nice wheels! I have a 1986 190E 2.6 Will these wheels fit ?@JMR1 Please let me know which vehicle or vehicles you need these wheels for, and I will confirm whether they are a suitable fit. If they are compatible, I will also provide recommendations for the appropriate tires. Thank you, and feel free to reach out if you have any further questions.Do you know which chassis models these would fit on?Hello everyone: A little about the wheels on auction These BBS RG wheels are extremely rare, especially in this staggered version with +22 offset on the front and +21 offset on the rear. They are very difficult to find even in Europe, and I can confidently say that it is almost impossible to get them in this specific width and offset combination. BBS RG wheels are some of the finest one-piece forged wheels ever made by BBS, produced using forging technology, making them significantly lighter and stronger, similar to competition wheels. The "G" in the RG name stands for the German word "Geschmiedet," meaning forged. These wheels were first introduced in 1987 and re-released in 1992, featuring BBS’s signature cross-spoke design. The wheels come in a unique bronze finish – neither gold nor silver. Although marked "Made in Germany," the forging process was carried out in Japan, with final finishing and treatment completed in Germany. The wheels are in excellent condition, professionally refinished with silver powder-coated faces and hand-polished lips, retaining their original quality and aesthetic value. Included with the wheels are four authentic BBS center caps, as well as original German ABE documents confirming their authenticity. These wheels are a perfect fit for Mercedes-Benz vehicles, and due to their dimensions and high quality, they present a fantastic opportunity for enthusiasts looking for original BBS wheels for their car.