These staggered 3-piece 17" AMG Aero III wheels measure 8.5″ wide in the front and 10" wide in the rear, and were manufactured by O.Z. Racing for use on Mercedes-Benz AMG vehicles. The faces are finished in silver and accented with polished lips. Manufacturer casting marks are present on each wheel and four Mercedes-Benz center caps are included. Each wheel has been professionally refinished in preparation for the sale. These authentic AMG Aero III wheels are now offered by the seller on behalf of the owner in Houston, Texas and worldwide shipping is available at the buyer's expense.
These 5-hole AMG wheels feature a 3-piece design with exposed bolts around the lip. The faces are finished in silver while the lips are polished and benefit from a recent professional refinish. The seller reports there have been no lug hole cracks on any wheel. Up close photos of each face are provided in the gallery showing the premerger AMG logo on each face.
The front wheels measure 8.5" wide with an offset of +18 while the rear measure 10" wide with an offset of +17. Close up photos of the back of the wheels are viewable in the gallery showing AMG Germany as the place of manufacture. The wheels feature a 5x112 bolt pattern and 66.67 center bore which is specific to Mercedes-Benz vehicles.
Mercedes-Benz center caps are also included and pictured with each wheel. These authentic AMG Aero III wheels are made by O.Z. Racing in Germany with worldwide shipping available.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
4 Comments
$4,800 bid placed by @drehb
$4,750 bid placed by @Mziou
$4,500 bid placed by @KVcollects
$4,450 bid placed by @BJulian1212
$4,400 bid placed by @KVcollects
$4,350 bid placed by @Fish23geeks
@Smrlsn09 Beautiful set of wheels! The 17” AMG OZ Racing 3-piece wheels are one of my all-time favorite period AMG designs. They look fantastic on a W126/C126 or R107 and are getting increasingly difficult to find in nice condition. GLWA!$4,300 bid placed by @Amg007
$4,250 bid placed by @jspalani17
Hi @bigjay850. This set can fit on a standard body SEC which will give it a flush stance. Since you are asking about one lowered on H&R, tire selection is very important. Factory ride height is 235/45/17 in front, but on lowered springs going with 215/45/17 or 225/45/17 tires will help with clearance. In the rear factory ride height says 255/40/17 or 265/40/17 tires. You are better off using 245/40/17 tires for clearance purposes. Using 255/40/17 or 265/40/17 tires may require slight fender rolling on a lowered SEC.$3,888 bid placed by @Amg007
$3,650 bid placed by @Fish23geeks
@Smrlsn09 Great looking wheels! Will these fit none wide body 1984-1991 SEC lowered on H&R and up to what tire size? Online research says supposedly you can fit 235/45R17 for the front and 265/40R17 (or even 285/35R17) tires, not sure if those will rub and etc.$3,600 bid placed by @Melspace02
$3,550 bid placed by @jspalani17
$1,300 bid placed by @good_wood_com
$1,100 bid placed by @zein
Hi everybody! I am pleased to present this 17” staggered Aero III Monoblock set. These wheels have a very low offset front and rear meaning that the wheels poke out toward the fenders. This results in the wheels fitting models with wide fenders. This set is a direct fit for the W126 & R129 as mentioned in the listing. It will also fit in nicely on the 500E. I am here to answer any questions.$1,000 bid placed by @KVcollects