These staggered 3-piece 19″ Lorinser RSK-3 wheels measure 9″ wide in the front and 10" wide in the rear, and were manufactured by Ronal in Germany. The faces feature a silver machined finish along with a polished lip. Dimensions, offsets, and other manufacturer casting marks are present on each wheel and four authentic Lorinser center caps are included. Each wheel has been professionally refinished in preparation for the sale. These authentic Lorinser wheels are now offered by the seller in Orlando, Florida with shipping offered at the buyer's expense.
These 5-hole Lorinser wheels have been professionally refinished and come with a dual drilled bolt pattern. The wheels can be used on vehicles with 5x112 and 5x114.3 bolt patterns but were designed for the W140 chassis, although they can fit various other models as well. Up close photos of each face are provided in the gallery and no imperfections are noted.
The front wheels measures 9" wide and the rear wheels are 10" wide, both with an offset of +38. The wheels were manufactured by Ronal for Lorinser which can be seen on the back of each wheel. Close up photos of the back of the wheels are viewable in the gallery and the reverse bolted, 3-piece design can be seen as well.
Lorinser center caps are included with the wheels and are currently installed. The seller notes two of the center caps have minor imperfections which have been highlighted in the gallery. Photos show the center caps both on and off, exposing the bolt patterns around the center hub.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
9 Comments
$4,222 bid placed by @ARPINE2011
$4,161 bid placed by @Jayfrza79
$4,111 bid placed by @ARPINE2011
$3,883 bid placed by @Jayfrza79
$3,833 bid placed by @ARPINE2011
$3,783 bid placed by @Jayfrza79
$3,733 bid placed by @ARPINE2011
$3,683 bid placed by @Jayfrza79
$3,633 bid placed by @ARPINE2011
$3,583 bid placed by @Jayfrza79
$3,533 bid placed by @ARPINE2011
$3,483 bid placed by @Jayfrza79
$3,433 bid placed by @ARPINE2011
$3,383 bid placed by @Jayfrza79
$3,333 bid placed by @ARPINE2011
$3,149 bid placed by @Jayfrza79
$3,099 bid placed by @ARPINE2011
$3,049 bid placed by @Jayfrza79
$2,999 bid placed by @ARPINE2011
$2,750 bid placed by @Jayfrza79
$2,700 bid placed by @ARPINE2011
$2,650 bid placed by @Jayfrza79
$2,600 bid placed by @ARPINE2011
$2,550 bid placed by @Jayfrza79
$2,500 bid placed by @ARPINE2011
$2,300 bid placed by @Jayfrza79
$2,250 bid placed by @ARPINE2011
$2,100 bid placed by @1991driven
$2,050 bid placed by @Takeflight
$2,000 bid placed by @1991driven
$1,950 bid placed by @Jayfrza79
$1,900 bid placed by @1991driven
$1,850 bid placed by @Jayfrza79
$1,800 bid placed by @1991driven
$1,750 bid placed by @Takeflight
$1,650 bid placed by @Jayfrza79
$1,600 bid placed by @Shyk1965
$1,550 bid placed by @Jayfrza79
$1,500 bid placed by @Shyk1965
$1,450 bid placed by @TajTurner
@Vlad600sel rear : 265/35 Front 245/35$1,400 bid placed by @Shyk1965
$1,350 bid placed by @TajTurner
$1,300 bid placed by @ARPINE2011
$1,250 bid placed by @Shyk1965
Perfect fit for w140 ? What tires size? Please$1,200 bid placed by @Vlad600sel
$1,150 bid placed by @Shyk1965
$1,100 bid placed by @ARPINE2011
$1,050 bid placed by @Shyk1965
@eleaston42 I have no record of a 9 inch wide wheel being used on the front axle of the W211. According to MB, the maximum width for the front is 8.5 inches. It all depends on the caliper size and the wheel's internal design. A 10mm spacer, bringing the offset down to 28 might work, but I wouldn't want to recommend something I haven't verified myself. If you use a spacer to clear the caliper, you'll then need to check whether you need to roll your front fenders. These wheels were specifically designed for W140 & C140 applications$1,000 bid placed by @eleaston42
@Hi_Power Thanks! That is what I thought might be the issue.. Doug@Hi_Power Would front hubcentric spacer address this issue?@Velocetta Although the offset range may work to use these LORINSER wheels on a W211, due to their concave design, the calipers will rub against the inner face of the front wheels..Do these take ball or conical lugs? Seeing if they’ll work on older M12 cars.@Velocetta not sure for the w211, never tried them on oneHello, It appears that this offset will work on a W211 AMG, but do you know if they will clear the front callipers? Thanks, Doug$500 bid placed by @mickeybharat