These staggered 3-piece 17" AMG Aero III wheels measure 8.5″ wide in the front and 10" wide in the rear, and were manufactured by O.Z. Racing for use on Mercedes-Benz AMG vehicles. The faces have been fully painted in silver along with the lips and bolts. Manufacturer casting marks are present on each wheel with AMG Germany stamps. These authentic AMG Aero III wheels are now offered by the seller in Boca Raton, Florida and worldwide shipping is available.
These 5-hole AMG wheels feature a 3-piece design with exposed bolts around the lip. The faces of each wheel have been recently painted silver including the lips and bolts. The premerger AMG logo is visible on each face. There are some imperfections noted around the lips as well as some cracks on the inside lug holes as denoted below:
The front wheels measure 8.5" wide with an offset of +18 while the rear measure 10" wide with an offset of +17. Close up photos of the back of the wheels are viewable in the gallery showing AMG Germany as the place of manufacture. The wheels feature a 5x112 bolt pattern and 66.67 center bore which is specific to Mercedes-Benz vehicles.
These authentic AMG Aero III wheels are made by O.Z. Racing in Germany with worldwide shipping available at the buyer's expense.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
15 Comments
@ParTime94 Yes these aero 3s are all premerger units@Jeffreyis we produce high volume sets at a consistency we try very hard to be upfront with everyone of our clients this set was rolling on a car for 18 years the owner had no trouble with them whatsoever.Are they also pre merger?$4,300 bid placed by @Nandito
Do the extras have cracks too?$4,250 bid placed by @ParTime94
$4,200 bid placed by @Nandito
we also have a extra front and rear aero 3 if the winner of this auctions decides they want an extra two pairs of wheels to feel secured.$4,150 bid placed by @DLB79
$4,100 bid placed by @Nandito
$4,050 bid placed by @DLB79
$4,000 bid placed by @Nandito
$3,200 bid placed by @Majdaqel93
$3,000 bid placed by @Nandito
$2,450 bid placed by @ParTime94
$2,400 bid placed by @Majdaqel93
$2,350 bid placed by @ParTime94
$2,300 bid placed by @Nandito
$2,250 bid placed by @DLB79
$2,200 bid placed by @ParTime94
$2,150 bid placed by @Nandito
$2,100 bid placed by @ParTime94
$2,050 bid placed by @BorderAuthority
@majdaqel93 two of these wheels are unusable because of the bolt hole cracks, they will literally fall off the car at speed. These are for parts only, please don’t run cracked wheels on your car it’s not safe.@Majdaqel93. Thanks for insight about tires not losing pressure very good to know.$2,000 bid placed by @Nandito
$1,500 bid placed by @Majdaqel93
Nice set. Bolt hole cracks are on every single set of these wheels. they have nothing to do with air pressure since the bolt holes don't hold air... the barrel and lip are what hold the tire. if those are good then the wheels are perfectly safe.$850 bid placed by @Nandito
$800 bid placed by @ParTime94
Hi @Fiatlux. This is a notorious small issue when it comes to these wheels. Most people who have these wheels on their car for a while most likely have the same problem and they do not even know it. Driving on this set around town is not going to cause any issues. Over such a long time the force of driving puts stress on the area. The members on the 500Eboard forum call it metal fatigue. Long distance driving may pose a risk.Can the cracks you mentioned pose safety risks while driving?$550 bid placed by @BD450SL
Hi @VerbalKent. These hairline cracks in the center hole are very minor. The gentleman I bought the set from had it on his 1993 R129. He drove on them for quite some time and did not report an issue. If there is any leaking air it should not cause the PSI to drop quickly or too much.@Smrlsn09, do you know if the cracks are allowing air to leak?$500 bid placed by @jordainthompson
$50 bid placed by @RIAMG
Hi everybody! I am pleased to present this 17” staggered Aero III Monoblock set. These wheels have a very low offset front and rear meaning that the wheels poke out toward the fenders. This results in the wheels fitting models with wide fenders. This set is a direct fit for the W126 & R129 as mentioned in the listing. It will also fit in nicely on the 500E. The listing mentions small cracks in the lug holes for a couple wheels. This is a very common issue for these particular wheels so I took close ups of this in the gallery. I will answer any questions you have.Hi @Jimmybueno. Unfortunately this set on your narrow body W124 300E will not work. The offsets are too low which would result in serious clearance issues. The wheels will poke out way too far and rub the fenders because of improper fitment.Will these fit my 1993 300e? I have fake replicas on right now with an offset of 25 and needed spacers so they stick out pass the fender and rub