These 2-Piece Staggered 18″ AMG Aero II Monoblock wheels measure 8.5″ and 10″ in width and were manufactured by BBS in Germany for use on Mercedes-Benz vehicles. Dimensions, offsets, and other manufacturer casting marks are present on each wheel. The wheels have been refinished in silver in preparation for the sale. The AMG logo is stamped on the front and back of each wheel, and four Mercedes-Benz center caps are included along with original BBS stamped wheel bolts. Originally offered as an optional factory upgrade for the later model R129 SL600, SL60, SL70 and SL73 AMG, the wheels also fit other various other Mercedes-Benz models. These rare AMG wheels are now offered in Boca Raton, Florida and worldwide shipping is available.
These 2-piece wheels have been recently refinished. The faces and lips are finished in silver. The multi-piece design features 20 exposed bolts around the face of the wheel which show their original BBS logo. Detailed photos are provided in the gallery.
The front wheels measure 8.5″ wide with part number HWA129 400 15 02, while the rear 10″ wheels show part number HWA129 400 17 02. All four wheels have an offset of +25mm and bolt pattern of 5x112.
The BBS and AMG logo appears on the back of each wheel along with a production mark showing Germany as the place of manufacture. These rare AMG wheels are now offered by the seller in Boca Raton, Florida.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
19 Comments
$1,350 bid placed by @Amg007
Hi @PSS130. There are several photos of the barrels shown in the gallery. There are some marks left over from when they were removed from the tires. The barrel itself was painted but not powder coated like the outer and inner part of the face. The lips of the barrel were powder coated just like the face. As for the bolts, the guy who refinished them assured me that all the bolts are securely fastened inside the holes. As for the bolt sticking out slightly it just might be that it won't go in any further but its for sure not loose in any way.$1,300 bid placed by @PSS130
@Smrlsn09 Would you be so kind and send better pictures (close ups) of the bead and the inner flange of the rim? Seems as though that part was not touched at all during the reconditioning process. (Left over tire marks) Also, please check on one of the bolts sticking out a bit when compared to the rest. Is it loose or was it impossible to tighten it all the way? With all due respect I am not picking your listing apart. I am interested in the set but need it to be done right before they are mounted.Hi @PSS130. Yes the wheels were properly disassembled before the refinishing process. The process is to remove the bolts and the face. After the face is detached from the barrel, it can be worked on separately. Once the face and barrel are completely refinished, the bolts are put back on which reconnects the two back together.Have these wheels been properly disassembled prior to the reconditioning process?Hi @240Dturbo. Yes that hole that is not covered on each wheel is where the valve stem goes. There are no bolts missing and there are 20 bolts on each wheel just to clarify.@240Dturbo I think you're looking at the hole for the valve stem?Does anyone know why there are 4 bolts between spokes except for the space opposite the AMG logo which has 5? I assume it is to assure proper realignment if ever taken apart.$1,250 bid placed by @Miiick
Additional photos have been added to the gallery.@JMRIEGEL. Thanks for pointing that out. I thought my information was correct originally but then I thought I read something different trying to confirm.You were correct the first time @seller, spacers will lower the offset, there is no way to increase the offset of a wheel as you cannot push it further in.*20mm@AA0506. Getting back to my last comment in your case you need the spacers to increase the offset. My mistake. Twenty inch spacers would be what you need.Hi @AA0506. Just like the W140/C140, your W220 shares nearly the same offsets as that chassis. The offsets of these models are in the 40s most times whereas this set has an offset of 25 front and back. The only way to fit this set on your car is to go with spacers to lower the offset.Will these fit 04 s55 amgHi @ClassicRider. These wheels would look good on a C140 coupe. The offsets on that car compared to this set are just too far apart for a perfect fit.Wish these would fit a W140 (c140) s class coupe. Always liked the look of themHi @Boatymcboatface. Yes I will try to send a few more pictures this weekend of wheels more up close. I can say that these wheels are straight and true with no bends, welds, or cracks of any kind.Nice to see some of these available. As someone who’s purchased these before and been greatly disappointed with imperfections not disclosed @seller Can you take some more close-up pictures and disclose if there’s ever been any damage or any welding repairs??$1,000 bid placed by @Jazzman
$500 bid placed by @Romitroyce
Hey everybody! I am proud to present these Staggered 18” BBS AMG wheels. They directly fit on various models which makes them desirable. A few to mention are the R129, W210, W202, W208, and the W124 500E. Another model that does not get mentioned often times is the R170. The versatility of these wheels in terms of fitment makes them a real option for many Mercedes Benz owners. I am here to answer any questions