These 3-piece 17" AMG Aero III wheels measure 8.5″ wide on all four corners, and were manufactured by OZ Racing for use on Mercedes-Benz AMG vehicles. The faces are finished in silver and have been repainted. Manufacturer casting marks are present on each wheel and four new Mercedes-Benz center caps are included. Signs of prior use are present and the ET30 offset is designed for W124 vehicles. These authentic AMG Aero III wheels are now offered by the seller in Boca Raton, Florida and worldwide shipping is available.
These 5-hole AMG wheels feature a 3-piece design with exposed bolts around the lip. The faces are finished in silver and have been repainted with painted lips. The seller reports there have been no lug hole cracks on any wheel. The wheels feature a 5x112 bolt pattern and 66.67 center bore which is specific to Mercedes-Benz vehicles. Some prior wear marks are visible on the wheels and lips.
All four wheels measure 8.5" wide with an offset of +30 and show AMG Germany as the place of manufacture. Close up photos of the back of the wheels are viewable in the gallery. The wheels feature a 5x112 bolt pattern and 66.6 center bore which is specific to Mercedes-Benz vehicles.
Part number C7400189 is engraved on the back of each face and are designed for W124 AMG vehicles. Newer Mercedes-Benz center caps are also included and pictured with each wheel. These rare authentic AMG Aero III wheels are made by O.Z. Racing in Germany with worldwide shipping available from the seller in Boca Raton, Florida.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
12 Comments
Congrats & enjoy. They would've looked good on my A124 ...smh$5,055 bid placed by @gogo300ce
$5,000 bid placed by @Antal
$4,550 bid placed by @gogo300ce
$4,500 bid placed by @Antal
$4,250 bid placed by @gogo300ce
$4,100 bid placed by @Antal
$4,050 bid placed by @ParTime94
$4,000 bid placed by @Antal
$3,850 bid placed by @gogo300ce
$3,800 bid placed by @Antal
$3,550 bid placed by @ParTime94
$3,500 bid placed by @Antal
$3,450 bid placed by @ParTime94
$3,400 bid placed by @gogo300ce
$3,350 bid placed by @Antal
$3,300 bid placed by @ParTime94
$3,250 bid placed by @gogo300ce
$3,200 bid placed by @Antal
$3,150 bid placed by @gogo300ce
Hi @gsxr. I believe so when it comes to the bolts. It’s nice to see you on here. I saw you on the comment section on the 500Eboard when I was researching these wheels and what they fit on.Just curious, do the bolt holes accept 14mm lug bolts? That would limit fitment on newer chassis (which these wouldn't be period-correct for).Hey everyone. As the auction winds down, I just wanted to share that this set is a direct fit for the W124 & W211 (E Class) as well as the W208 & W209 (CLK). Based on similar dimensions, there is a high probability that this set can fit on other chassis such as the W202 & W203 (C Class), W210 (E Class), along with R170, and R171 (SLK). This is for anyone who may have missed my comment from earlier in the auction.$3,100 bid placed by @Antal
$3,000 bid placed by @Vlad600sel
$2,800 bid placed by @gogo300ce
$2,750 bid placed by @Melspace02
$2,500 bid placed by @Vlad600sel
$2,050 bid placed by @95Cab
$2,000 bid placed by @WTFLLC
$1,850 bid placed by @95Cab
$1,800 bid placed by @Vlad600sel
$1,750 bid placed by @95Cab
$1,700 bid placed by @Mziou
$1,400 bid placed by @95Cab
$1,350 bid placed by @Vlad600sel
Thank you nHi @95cab. Yes this set will fit right on the 1993 500E and the 1995 E320.93 500e fit? 95 e320 fit?$1,050 bid placed by @95Cab
$1,000 bid placed by @Vlad600sel
$600 bid placed by @LincolnAMG
Hi @Korey112. Yes this set will fit right on your 1989 300E with no modifications needed.Will these fit an 89 300eHi @Why_Not. The Aero III wheel that fits the R129 is 17x8.5 ET18. This set is 17x8.5 ET30. Maybe with the 330mm rotors it can fit but I can’t say for certain. On a side note, the classic EVO II set directly fits the R129 which is 17x8.25 ET34. Those dimensions are very similar to this set which makes me think it can fit.Hi, Any chance you could get a wheel weight ? Pretty sure these would fit a late model R129 with 330 mm rotors and Brembo calipers. ? Thank you.$500 bid placed by @95Cab
Hi everybody! I am excited to present this 17” squared Aero III set. As mentioned in the literature, this set is tailored directly to the W124. Im sure many of you are familiar with the Aero III set tailored for the W126 and R129 with the dimensions 17x8.5 ET18 front and 17x10 ET17 rear. That set can fit the 500E but not the rest of the W124 models. Thats why this set is so special because it fits all the W124 models directly with no modifications needed. It is a rarity to see a set like this with the offset of 30. After doing some research, I stumbled upon the 500Eboard forum where someone had this exact set mounted on the 190E W201. Let’s talk about fitment! When I looked at the Mercedes Fitment Chart, I believe this set can fit the 500E W124. It says fits “Wide Wheel Arch” next to the 17x8.5 ET30 dimensions under the W124 column. This set is also a direct fit for the W208, W209, and W211. A few other chassis it may fit on are the W202,W203,W210,R170, and R171.$50 bid placed by @Schlupp