These factory Mercedes-Benz Evo II wheels all measure 17" x 8.25” and were manufactured by in Italy for use on the W201 and W124 chassis. The wheels have been used prior and remain in very good condition. Finished with silver painted faces, this wheel design was offered by Mercedes-Benz on a number of models including the W201 Evo II and W124 500E Limited. This particular set features an offset of +34. Dimensions, offsets, and other manufacturer casting marks are present on each wheel. These Evo II wheels are now offered by the seller in Chichester, NH with Nitto ties mounted and OEM center caps installed.
The six-spoke wheels feature silver painted faces with specifications stamped on the inside of the wheel. There are no noticeable blemishes on the outside of any wheel and each measures 17" x 8.25” with an offset of +34 and bolt pattern of 5x112.
The part number is listed as B6 647 00 61. The single-piece wheels show no scrapes or other imperfections on the faces or lips. Close-up photos showing the condition of the wheels are provided in the gallery. Nitto NT555 tires are mounted and measure 225/45 all around with 2021 date codes noted. One tire shows some minor scrubbing marks and is photographed in the gallery.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
10 Comments
@Smcase22 They were purchased for a project that fell through. They are brand new and never refinished. Factory colour and factory wheels!What are these off of? Are they refinished? Is that a factory colour?$1,200 bid placed by @s14driftkid
W211 uses M14 lug bolts, these wheels have M12 holes... you'd need to drill the holes larger and use custom hybrid bolte with M14 thread and R12 ball seat. Width/offset may work if your maths are correct.Anyone tried these on an S211? Spec offset for 17x8 is 30 and spec for 17x8.5 is 38...so the ET math seems right, here?@sirmathrocks, yes, it's possible to convert these to High Sheen. The silver paint finish must be machined off on a lathe to expose the bare aluminum surface, then clearcoat applied. Only a handful of wheel shops in USA can do this properly, and it isn't cheap. I'd recommend doing that on a set that needs refinishing, not this set for sale which appears to be in very good condition. Note that the "high sheen" finish is notorious for having the clearcoat fail in small areas which then causes corrosion of the aluminum under the clearcoat... it's not a durable finish. Best for museum cars, not daily drivers.$1,000 bid placed by @n883jj
@mwren yes, dm me with your zip code to get shipping rateswill shipping be available?@gsxr can these be converted over to the High Sheen finish ones that was original for the E500 limited and E60?$700 bid placed by @sirmathrocks
$550 bid placed by @n883jj
$500 bid placed by @Michaelmotorcar
@W124ONLY, the High Sheen finish version of these wheels were factory fitment on the E500 Limited. They fit perfect and look great. Search 500Eboard.com for pictures of these wheels on the E500E. Note the ones for sale here are painted silver (not clearcoat over machine finish) but otherwise identical.How would these look on a 1994 500E? Would they fit?