These 17″ AMG Aero I Monoblock wheels measure 8″ in width all around and were manufactured in 1995 for use on Mercedes-Benz W124 AMG vehicles. The faces are finished in silver and show part number HWA124 400 19 02. These are the later versions of the Aero I which have HWA part numbers and the updated AMG script. The wheels have been recently refinished in silver and show some prior evidence of use. Original AMG flat center caps made by O.Z. are included in the sale. These AMG wheels are now offered by the seller in Boca Raton, Florida with worldwide shipping available.
These 5-hole monoblock Aero I wheels were originally mounted on a W124 AMG and feature a silver finish. The wheels were formerly chromed and recently refinished in silver. The seller notes some signs of prior useage and patina as seen in the photos. The part number HWA124 400 19 02 is shown stamped on the back.
Each wheel measures 8" wide with an offset of +28. Detailed photos of the back of each wheel are viewable in the gallery showing all stampings. All four wheels feature a 5x112mm bolt pattern and 66mm center bore which is specific to Mercedes-Benz vehicles.
Production years are stamped showing 1995 on the back of each wheel. Original AMG flat center caps with O.Z. stamps on the backside are installed and included in the sale. The seller can accomodate international shipping needs for buyers with quotes available upon request.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
3 Comments
$2,400 bid placed by @Dangerwillrbnsn
$2,350 bid placed by @Louie1072
$2,300 bid placed by @Dangerwillrbnsn
$2,250 bid placed by @Louie1072
$2,200 bid placed by @Dangerwillrbnsn
$2,150 bid placed by @Louie1072
$2,100 bid placed by @Dangerwillrbnsn
$2,050 bid placed by @Louie1072
$2,000 bid placed by @Dangerwillrbnsn
$1,900 bid placed by @Louie1072
$1,750 bid placed by @Dangerwillrbnsn
The AMG installation documents for this exact size / offset can be found here: https://www.w124performance.com/docs/mb/wheels/AMG_124_wheel_installation/wheel_install_17x8.0_ET28.pdf Rolling the fender lips & adding the fender spacers, along with the other mods described, is recommended to eliminate rubbing.Hi everyone! For all the W124 owners out there with a narrow body model, this set can still work just fine on these cars. All it needs is a little adjustment inside the fenders to fit just right. In my previous statement I said that this set on narrow body W124s is an “aggressive” fitment that sits flush. This just means that the wheels will poke out slightly because of the 28 offset giving it a real solid stance. Usually narrow body W124s have offsets ranging from ET35-49. The higher offset results in the wheels sitting deeper inside the fenders. I hope this clears up any confusion on the matter.$1,500 bid placed by @Vlad600sel
$1,200 bid placed by @quickmath
$1,150 bid placed by @zoccierampqt
Hey everybody! I am excited to present this rare 17” Aero I Monoblock set. This is a post-merger set with the HWA124 part number. The subtle difference between this set and a pre-merger one is that the dimensions and part number are presented on the inside of the wheel rather than on the face. Another difference is that this set has the modern Amg logo rather than the earlier version. In terms of fitment this set can fit the 500E just fine but it is an aggressive fitment for the narrow body W124s making the wheels sit flush. Putting these wheels on the narrow body W124s will likely require fender rolling in the front & rear. Narrow body W124s should use 215/45/17 tires. This set can also be placed on W126, W210, & R129 models. These wheels will come with original OZ flat center caps. Lastly I also have an 18” Aero II Monoblock set on MB auction as well. For any person direct messaging me please just state which set you are referring to because when I open the email it does not say which set its for. I will answer any questions here on listing or through DM.$1,100 bid placed by @quickmath