
These 2-piece 19" BBS LM-R wheels measure 8.5″ wide in the front and 10" wide in the rear. They were special ordered through the MyBBS program and only used for one show before being stored in their original BBS boxes. The faces feature a gold finish with polished lips and BBS hardware. Dimensions, offsets, and other manufacturer casting marks are present on each wheel and four BBS center caps and metal valve stems are included. The seller states the wheels will fit the R129, R230, and W124.036 500E/E500, but can be used on other chassis models as well depending on suspension and tire setup. These authentic BBS LM-R wheels are now offered by the seller in Mishima, Japan with shipping offered at the buyer's expense.
These mesh-style BBS LM-R wheels feature a 2-piece design. The faces have a gold finish while the lips are polished. Up close photos of each face are provided in the gallery showing BBS hardware and center caps. No major blemishes are noted and the wheels have been properly stored after reportedly being used for only one show.
The front wheels measures 8.5" wide with an offset of +15 and show JA220 as the BBS part number. The rear wheels are an additional 1.5" wider at 10" with a +16 offset and show JA221 as the part number. All stampings can be seen around the lug holes with the center caps removed. Close up photos of the back of the wheels are viewable in the gallery as well. The wheels feature a 5x112 bolt pattern and will come with 4 PFS (precision fitment system) rings by BBS to adjust hub bore size to 66.67mm which is specific to Mercedes-Benz vehicles.
Authentic BBS center caps and metal valve stems are also included with the wheels. The seller is able to offer shipping for these special ordered 19" BBS LM-R wheels at the buyer's expense.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!

7 Comments
@Pinballer what a deal sir ! email sent 📤$2,500 bid placed by @Pinballer
$1,950 bid placed by @RaldoP
$1,850 bid placed by @Classen
$1,750 bid placed by @RaldoP
$1,700 bid placed by @Pinballer
$1,650 bid placed by @RaldoP
@Avicenna thank you ! et 11-23 is the usual range you want to stick to, so it would technically fit. Just be aware that putting 19" wheels on a 126 chassis might trigger an International Arrest Warrant from the Purity Police... good luck on the auction !$1,500 bid placed by @Ehfischer
Hello, beautiful set of wheels you got! Do you know if these would fit fine on an SEC 560? I know my current ET is about 25 not sure if ET16 would work and look right?$1,179 bid placed by @stpaul7
$1,129 bid placed by @gavenchakn
@OPointsbrad i have been looking all over the "japanese" internet, couldnt find any. ET 16-15 is aggressive yes but not unheard of. Carlsson used 19 x 10" et 19 specs for its R129 rear wheel offering, will share the brochure shortly.do you have any pics with the wheels on the car?These LM-Rs are the missing link, because they feature for the first time on multipiece wheels these very sexy hollowed spokes soon to be extended to the rest of the BBS offering. You wouldnt have the crazy aggressive RI-Ds or FI-Rs without the LM-R paving the way.hello and welcome to these 19" staggered custom ordered BBS LM-R wheels! The LM-R model is a sort of missing link in the BBS line up, linking heritage models like the LMs with performance ones like the FI-R and RI-Ds more on that in a bit. Shipping to ANY US or Canada address is 990 USD with UPS expedited shipping. Economy shipping is also available (640 USD) Payment is done preferably with ACH wire, and tariffs (15% on *stated* value) are charged upon checkout. As stated in past auctions I have stopped accepting shipping on behalf of buyers, meaning I will arrange for packing, shipping and eventual custom clearance support on my own. Auction ends around 4am my time so questions and bids are encouraged sooner rather than later Happy bidding!$1,000 bid placed by @Ehfischer