These staggered 20″ RENNtech Monolite wheels measure 9″ wide in the front and 10.5" wide in the rear, and were manufactured by Champion Motorsport for RENNtech to use on R230 and C219 Mercedes-Benz vehicles. The faces have been freshly refinished and are powdercoated silver. Manufacturer casting marks are present on each wheel with "RENNtech" and "Forged" engraved on each and four RENNtech branded center caps are included. These RENNtech Monolite wheels are now offered by the seller in Boca Raton, Florida.
These 10-spoke monolite wheels were originally designed for the R230 and C219 platforms by RENNtech although they can be used on other models as well. Each wheel has been professionally refinished and powdercoated in silver in preparation for the sale. Up close photos of each face are provided in the gallery.
The front wheels measure 9" wide with an offset of +25, while the rear wheels measure 10.5" wide with an offset of +32. The wheels are forged and made by Champion Motorsport exclusively for RENNtech. Close up photos of the back of the wheels are viewable in the gallery and all four wheels feature a 5x112mm bolt pattern.
Authentic RENNtech-branded center caps are also provided with the wheels and pictured in the gallery. These AMG wheels are now offered by the seller in Boca Raton, Florida.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
14 Comments
Well thats one way to knock 'em out. Dang
$3,000 bid placed by @Illmatic96ss
$1,950 bid placed by @Biggerbenz
$1,900 bid placed by @AvgDrvr
$1,850 bid placed by @GraysonH
$1,800 bid placed by @Biggerbenz
@gsxr. You are correct no offsets are shown but those are the same dimensions. Im most certain there was only one version of the 20” Monolites.
what post number shows offsets? I looked through all 54 posts and only saw diameter, width, and tire sizes... no offset data. I'm not saying these won't fit a W211, just that I don't see confirmation in that particular thread! ;)
Hi @gsxr. If you scroll down a little the one person states that the wheels are 20x9 ET25 and 20x10.5 jET32 just like this set.
@Illmatic96ss - read the link below where the W211 photos were taken from. It's unclear if those photos have wheels with the same offsets or not. https://mbworld.org/forums/w211-amg/184136-renntech-20-s-my-e63-2.html
A picture has been added to the gallery showing a set of these wheels installed on a W211.
$1,750 bid placed by @GraysonH
Hi @Illmatic96ss. Yes these wheels can fit on the W211.
Will these fit on the w211 chassis
$1,700 bid placed by @AvgDrvr
$1,650 bid placed by @Shyk1965
$1,600 bid placed by @AvgDrvr
@Smrlsn09 please keep me posted Thanksnyou
Hi @Illmatic96ss. Sorry just missed that P30 set as I sold them on my last auction. I will for sure be on the lookout to find that set again.
Hi would you happen to have another set of the cromodora 18 p30 wheels ?
Hi @Dropthehammer. Yes the original look on these wheels has a machine finish on the lips. I just think having the whole refinish powdercoated is a nice look to the wheels. These wheels are in very good condition and have never been repaired.
I thought these were machined finish or polished? Have they had any repairs?
$1,500 bid placed by @Shyk1965
Hey everyone. I am excited to present these 20” Staggered Renntech Monolite Wheels. As mentioned in the listing, this set will fit directly on the R230 SL and C219 CLS. It can also fit on the W211. These wheels are very light weight for their size. Each wheel weighs 21lbs which allows for better handling and creates a more dynamic driving experience. The center caps are brand new and were purchased directly from Renntech Headquarters. I am here to answer any questions.