This rare authentic AMG body kit was manufactured for the S124 E-Class wagon. The parts were manufactured by AMG prior to their completiong of the merger with Mercedes-Benz and are no longer produced. The set includes a Gen 2 AMG front bumper, rear bumper, both side skirts, fog lights, tow hook cover, and all jack hole covers. Mounting tabs are shown intact on the rear bumper and fog lights, along with both front and rear impact strips. AMG stamps are found on each individual piece and new OEM jack hole covers showing HWA part numbers are included. The kit is believed to be the last iterations of the S124 wagon body kit by AMG. This rare Gen 2 AMG body kit for the S124 is now being offered by the seller in Danville, Virginia.
This rare body kit is the last kit offered from AMG for the S124 and is extremely difficult to locate individually, let alone as a complete set. This Gen 2 AMG wagon body kit for the S124 is now being offered by the seller in Danville, Virginia.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
28 Comments
@Orange911 I had a shop in California before I moved to Danville, VA. Now mostly this is just my stuff and there may be more to come but I hold on to things for spares for my own cars mostly. Is there something specific you are looking for?Very nice I have it on my wagon and make a big difference on appearance Maybe I should post it hereI’m so happy thank you for the opportunity @amgfanatic. This kit is a true gem, I’ve been dreaming of this for a while. Making boyhood dreams come true.@amgfanatic Do you have a shop in Danville, or was that you home garage? Just wondering if you had any other parts coming this way. Olin B.good score @Stan_LutionAnd I am in Raleigh, NC - so close.@Amgfanatic Yes agree they are hard to find, if I had an S124 wagon I would by this... actually I'm contemplating it anyway lol@Orange911 They sold either way!Was there a reserve on these?I would like to note these parts are not getting any easier to find. I rarely see wagon kits for sale used at all. I always wanted to build a wagon and have had this kit for 4 or 5 years now. But other things in life always come up and it has to go. Thanks for all the interest.@Stan_Lution That was @Racerrick$4,400 bid placed by @Stan_Lution
$4,350 bid placed by @Luipar
I'm out$4,300 bid placed by @Stan_Lution
@Orange911 The fees for parts are the same as for vehicles: 4.5% Buyer's Premium with a $225 minimum. See the HOW IT WORKS section for more info, thanks!$4,250 bid placed by @Orange911
@Stan_Lution killer build! I have an S124 but not the one you're thinking of- I'm not on IG (unfortunately or fortunately)$4,100 bid placed by @Stan_Lution
$4,050 bid placed by @Luipar
$4,000 bid placed by @Stan_Lution
I’m Stanlution on instagram I have a 92 manual swapped s124$3,600 bid placed by @Luipar
$3,550 bid placed by @Stan_Lution
Olllywexy see you bought zerorust old wagon.$3,400 bid placed by @Ollywexy
$3,500 bid placed by @Luipar
$3,350 bid placed by @Stan_Lution
What are the auction fees for parts? $225 or 4.5%?$3,300 bid placed by @Ollywexy
$3,250 bid placed by @Stan_Lution
$3,200 bid placed by @Racerrick
$3,150 bid placed by @Stan_Lution
$3,100 bid placed by @Ollywexy
$3,000 bid placed by @Stan_Lution
$2,900 bid placed by @Ollywexy
$2,850 bid placed by @Stan_Lution
$2,650 bid placed by @Ollywexy
@Orange911 yes of course$2,600 bid placed by @Stan_Lution
$2,350 bid placed by @Ollywexy
can these be picked up instead of shipping?$2,100 bid placed by @Stan_Lution
@Stan_Lution From what I remember about the impact strips none of the tabs were broken I had to remove them for primer and I never fully installed them which is why there seems to be gaps. It takes some time and there are a lot of tabs to release. Knowing they had to come back off I did not want to fully install them on the bumpers just enough to keep them safe from damage during shipping/storage. Thanks@Stan_Lution Yes the front bumper on the lower right had been repaired prior to my ownership. I dont know how bad the crack was but they did cover the AMG stamp during the repair. Yes the impact strips are not fully seated to the bumper so they can be easily removed and install the foam inserts. Photo 34 is where the AMG logo should have been but it was covered by the repair that was done to the front bumper. Photo 35 is of the pur label in the mold from amg of the front bumper. Photo 33 shows where they did the repair on the back side of the front bumper. Thanks,@M104AMG Yes. The impact strips snap in and have a couple screws on the outside edges. All parts were primered separately then lightly reassembled for shipping reasons and to get the bumpers back in boxes without damaging the impact strips.$2,050 bid placed by @Luipar
Can you provide some info on a few of the photos. 33 appears to interior damage of the bumper. Was it damage? If so was it fully cracked to the front side? 34 appears to there a blemish or deformity? Photos 6, 7, 26, 27, 34 appears to be gaps in the impact strip are all taps intact and unbroken? Thank you.Will the rear-bumper's impact strip come off easily in-order to insert the missing foam ? That is, was the primer sprayed on the impact strip with it removed from the rear-bumper ? Same question for front-bumper.$2,000 bid placed by @Stan_Lution
@M104AMG Where do you find the 2.- AMG Gen II front bumper bracket inner brace – HWA1248800014? there is a standard A1248800014 which is the factory bumper brackets from Mercedes which I bought new about 3 years ago now for my sedan when I installed a gen 2 kit on that car. But I have never say any HWA versions of this bracket or know what it is or how it is any different from the factory parts from Mercedes. the HWA 1248850137 I have seen and I have that on my sedan kit. Unfortunately I dont have a spare and it is a hard foam reinforcement at the top of the bumper lip just under the headlights. This is not a critical part for installing this bumper on the car though. I have checked and they are no longer available new unfortunately. I have not checked in a long time but the AMG micro logo used to be available I never got one or ran one on my cars. As for the chrome strips I have purchased many of the front bumpers about 5 from Mercedes when they were available and the holes are not drilled in the tops of the bumpers from AMG that would have been a customer choice to add them and drilled at the time of install or before paint. I never drilled the holes I just ran my kits without chrome and had the chrome on my side cladding body color matched. Everyone has there own taste I just never wanted to go through the hassle of drilling all the holes for the chrome on my cars.@Silverarrowauto no this will not fit the cabrio.Late-model AMG Gen II should have the stainless-steel accents, and the front assembly should consist of these pn#s: 1.- AMG Gen II front bumper cover – HWA1248850125 2.- AMG Gen II front bumper bracket inner brace – HWA1248800014 3.- Tow hook cover – HWA1248850126 4.- Auxiliary high beam light – Left HWA1408200756 5.- Auxiliary high beam light – Right HWA1408200856 6.- Energy Absorbing unit – HWA1248850137 7.- AMG logo micro emblem – HWA1045840143Do you guys think this would fit a facelift 95 124 cabrio?$1,000 bid placed by @Sportcarpr
$124 bid placed by @Vlad600sel