These staggered 18″ Gullideckel wheels measure 8.5″ and 10″ in width and were custom-built for use on various Mercedes-Benz models. The wheels began as original W126 Gullideckel wheels and were converted to a 3-piece design allowing for custom sizing. Finished in silver paint with a polished lip, these wheels feature a 5x112 bolt pattern and an offset of +25. The barrels and lips are made by OZ Racing and four Mercedes-Benz center caps are included. These custom 18" wheels are now offered by the seller in Marbella, Spain.
These multi-piece wheels are finished in silver with polished lips and are in excellent condition. The wheels will fit various Mercedes-Benz models including the W126, C126, and R129. The wheels remain free from any curb rash or bends. Photos of the faces and rears of the wheels can be seen in the listing.
The front wheels measure 8.5″ wide while the rear wheels measure 10″ wide. All four wheels feature a 5x112mm bolt pattern and an offset of +25.
These custom 18" Gullideckel wheels feature OZ lips and barrels and come with OEM Mercedes-Benz center caps. The wheels can be shipped worldwide by the seller and are located in Marbella, Spain.
A video of the wheels has been provided by the seller below.
The MB Market Insights
If there's one thing that makes the biggest difference in a vehicle's curb appeal, it's got to be the wheels. AMG proved this to be the case very early on and their 3-piece Aero III wheels (made by OZ Racing) have become an enthusiast favorite for many different models. Today, finding a set of Aero III's is quite challenging if buying from a reputable source. Fortunately, we have the perfect solution which blends the styling and fitment of the premerger AMG look with OEM plus equipment. The lips and barrels on this set of 18" Gullideckel wheels are made by OZ Racing and transform the ultra reserved design into modern bliss without losing the classic look. We've seen these wheels fitted to various W126 and R129 models although they should be compatible with other models as well. Whether you're looking for the perfect finishing touch to your build or you just want to set your Benz apart from the crowd, these wheels will provide the drooling double-take look that you're after.
@Fatfrog For your 560SEC with 18-inch rims, we recommend the following tire setup:
* Front Tires: 235/40/18 (8.5-inch width rim)
* Rear Tires: 265/40/18 (10-inch width rim)
Choosing the right tires is crucial for both performance and comfort. With a lower-profile setup like this, it's important to note that the difference in ride quality between high and low-quality tires becomes more noticeable. To ensure a smooth and comfortable driving experience, we strongly advise prioritizing quality when selecting your tires.
If you have any further questions or require further assistance, please feel free to ask.
@Shyk1965 that's a contradicton of terms, but be that as it may...with enough spacer I suspect that yes, these can be made to sit properly on a WB C126.
The original OZ Racing AMG wheels are 8.5x17 ET18 and the rears 10x17 ET17. These wheels are all ET25, very small offset differences that *shouldn't* cause any fitment issues ore require spacers. HOWEVER, these are 18" diameter vs the original 17" - Seller really should state if there would be any rubbing on popular chassis like the W126. These wheels vs OZ Racing wheels would be inset into the wheel opening by 7-8mm or about 1/3". Risk would be rubbing particularly on the rear. These should also bolt onto R129 SL's and probably ok for W124 E500E's.
Incase anyone is wondering about the shipping cost to the US, or any other country worldwide its approximately 550 USD.
If anyone has any questions please let us know! Thank you
WOW those are beautiful!! I don't think a lot of people understand the amount of work that goes into turning stock wheels into 3 piece...
Big money wheels!
23 Comments
$4,300 bid placed by @exanimas
$4,250 bid placed by @Shameer
$4,200 bid placed by @exanimas
$4,000 bid placed by @PaYo
$3,950 bid placed by @Shameer
$3,800 bid placed by @500bnz
$3,750 bid placed by @Shameer
$3,700 bid placed by @500bnz
$3,650 bid placed by @Shameer
$3,600 bid placed by @500bnz
$3,550 bid placed by @Shameer
$3,500 bid placed by @ccutler05
$3,350 bid placed by @PaYo
$3,300 bid placed by @Shameer
$3,200 bid placed by @HealeyUp
$3,000 bid placed by @Shameer
$2,900 bid placed by @500bnz
$2,850 bid placed by @Shameer
$2,550 bid placed by @500bnz
$2,500 bid placed by @Shameer
$2,450 bid placed by @500bnz
$2,400 bid placed by @PaYo
$2,250 bid placed by @500bnz
$2,200 bid placed by @HealeyUp
$2,100 bid placed by @500bnz
$1,950 bid placed by @HealeyUp
$1,900 bid placed by @500bnz
$1,850 bid placed by @HealeyUp
$1,750 bid placed by @500bnz
$1,500 bid placed by @PaYo
@jackasic Hello! Shipping to Houston is around 550 USD@Gunnerezra99 Hello! The rims are located in Marbella Spainwhat would shipping be to Collège Station, Texas 77840?Where are the wheels located?@Ncz1 hello! Shipping to the UK is 550 USD@Fatfrog For your 560SEC with 18-inch rims, we recommend the following tire setup: * Front Tires: 235/40/18 (8.5-inch width rim) * Rear Tires: 265/40/18 (10-inch width rim) Choosing the right tires is crucial for both performance and comfort. With a lower-profile setup like this, it's important to note that the difference in ride quality between high and low-quality tires becomes more noticeable. To ensure a smooth and comfortable driving experience, we strongly advise prioritizing quality when selecting your tires. If you have any further questions or require further assistance, please feel free to ask.Hi there, what would be the price for postage shipping to the UK England? Many thanks NickWhat size tires would you suggest ? Looking to put on a 560sec. Thanks@Mecey Hello!! The shipping to the US is around 550 USD for the rims.Shipping estimate feature not working. Any idea how much shipping would be to oregon usa?@AMG5pt4 heyyyy buddy! :) Get off the site and go finish something so you can do my rear main seal...oh, wait...that's me, Bye!@BlueridgeMB was thinking the same.@Shyk1965 that's a contradicton of terms, but be that as it may...with enough spacer I suspect that yes, these can be made to sit properly on a WB C126.$1,000 bid placed by @Shyk1965
$750 bid placed by @500bnz
Wow, 3-piece is life$500 bid placed by @Shyk1965
@Shyk1965 Hello! Yes they fit the W126 WidebodyHi there would these fit 1989 560sec AMG WIDE BODY HAMMER.The original OZ Racing AMG wheels are 8.5x17 ET18 and the rears 10x17 ET17. These wheels are all ET25, very small offset differences that *shouldn't* cause any fitment issues ore require spacers. HOWEVER, these are 18" diameter vs the original 17" - Seller really should state if there would be any rubbing on popular chassis like the W126. These wheels vs OZ Racing wheels would be inset into the wheel opening by 7-8mm or about 1/3". Risk would be rubbing particularly on the rear. These should also bolt onto R129 SL's and probably ok for W124 E500E's.@DenverAMG Hello! Unfortunately no, these rims won't fit the S124 without widening the wheel arches. Even then it'll be still tight.@Jm113k Hello! No, there are no lug bolts included with these rims.Would these fit a S124?Do they include lug bolts?Incase anyone is wondering about the shipping cost to the US, or any other country worldwide its approximately 550 USD. If anyone has any questions please let us know! Thank youWOW those are beautiful!! I don't think a lot of people understand the amount of work that goes into turning stock wheels into 3 piece... Big money wheels!$250 bid placed by @Ramrattan