Bid for your chance to own this 2008 Mercedes-Benz CL63 AMG on The MB Market. Finished in Black (040) over Black/Anthracite (801) leather interior, this C216 is powered by a 6.2L M156 AMG V8 engine and comes with extensive service history.
Bid for your chance to own these staggered 17" Aero III-style wheels on The MB Market. Measuring 8.0″ and 9.5″ in width, these wheels were custom-built by NLW for use on various Mercedes-Benz models and feature an electroplated fully chrome finish.
Bid for your chance to own these staggered 17" AMG Aero III wheels only on The MB Market. Finished in white with polished lips, these 3-piece wheels measure 8.5" in the front and 10" wide in the rear and fit various models including the W/C126, W124 500E, R107 and more.
Bid for your chance to own these staggered 2-Piece 17" Aero III-style wheels on The MB Market. Measuring 8.0″ and 10″ in width, these wheels were custom-built by NLW for use on various Mercedes-Benz models and feature a 2-piece design.
Bid for your chance to own this 2021 Mercedes-AMG E63 S only on The MB Market. Finished in Obsidian Black (197) over Anthracite AMG Exclusive Nappa Leather (561), power comes from a hand built twin-turbo AMG 4.0-liter V8 paired with a nine-speed MCT automatic transmission and LSD.
Amritrana87 said:
Hello everyone, I just wanted to thank everyone that is interested and or bid/commented thus far. I also want to address something I just realized was not Addressed in the listing. I had mentioned them to MB market, but I believe they were left out by accident. First thing., as you can see from the records the engine mounts were replaced less than 15,000 km ago however they were replaced with a much stiffer/more rigid engine mounts meaning when the engine ask for a few movements, they become a little restricted, this causes a small amount of vibration at around 2000 RPM before the harmonic balancer kicks in. It is nothing to worry about it is very minor and I have the mechanics report if needed. Lastly, very simple: the valve covers are leak leaking. They are leaking a little bit, but I still want to mention it. The reason for it not being done already is I’m just going to see if the car can sell as is as the reserve is set relatively low. Thank you everyone. I wish everyone could see this car in person because it is a true beauty from the interior to the exterior in no way does it show over “ 10,000 km the seats, especially the rear seats show nowhere I think no one has ever sat in the rear. It cruises down the highway at ridiculous speeds with butter like smoothness. Thank you all happy bidding.
@DLL58yes. TFX had told me there aren’t any 25% tariffs on Mercedes Benz vehicles, and also, the vehicle tariffs that have the 25% apparently start on May 2nd. Regardless, any potential US buyers, so most likely everyone, beware of this situation and please do some research or call TFX International for all info. I don’t think there is tariffs on this car.
@DLL58 oof! I hope I am correct. I gave a call to TFX and they mentioned it will not affect the car and 25% tariffs are not applied to this car. I hope so as I’m sure majority of buyers are from US. We shall see. If you are correct, a lot of people will be screwed over :/
@Motts71it can easily be changed in the settings. It changes the speedometer numbers to miles aswell. It is all digital.
@DLL58only on US/Can made cars. All US/Canada (depending if you are in Canada or USA) made cars will face 25% tariffs. Mercedes Benz cars being made in Germany are exempt from the 25% tariffs.
Welcome to my auction of this spectacularly optioned, very clean, CL63. I am proud to be handling the sale on MBMARKET. Extensive amount of work, time and money has gone into this vehicle for it to be where it is, the attention to detail is truly tremendous. I wanted to address a few things. – Canadian buyers will pay 5% GST + provincial sales tax if applicable – For American buyers, since IT IS A USA vehicle importing back into the US is straightforward and no taxes or fees are levied on the Canadian side. The car does not need any modification to meet USA standards. (Car was left into the USA standard when imported, system still in Fahrenheit) – Current import costs are: a 2.5% duty and a few hundred dollars in broker fees. TFX International will ship it to you, and their in-house broker will handle all the paperwork. You can request a quote from them here https://www.tfxinternational.com/ It can take them a couple of days for them to respond so it’s best to get in touch with them early. It drives like the day it drove off the lot. Thank you, and let’s see who takes this beast home.
@APSloan1I think the perfect tire set up for these Wheels would be 275/40/17 rear || 235/45/17 . You will still have lots of sidewall and the perfect stance. The ride will not be affected.
@superfuturaI am the owner of NLW FORGED and made these wheels myself. They’re not the Chinese performa brand. Just a custom wheel based off of a very popular OZ design that’s more cost effective and not prone to cracking. Perfect for those who don’t went to spend an arm and leg for this design.
@Fenouzno spacers are not needed for W126’s. Unfortunately not on this set, it is not possible to customize as it is a CAST wheel
@SGMotorsportsno lugs provided. They are BALL SEAT lugs. Local pickup is definitely possible!
@TimTyes i can ship anywhere! Shipping across North America isn’t much. Should be roughly $200-$250 for the set.
@TimThi Tim! I just checked. Good news. They will for your CLK55 perfectly!! The fitment will actually be very good, almost flush to the fenders, and you will not have any issues. I would suggest doing 255/40/17 rear and 225/45/17 front.
@Kevallinothe R107 would not need spacers to fit these wheels. However if you are looking for the best fitment, we would suggest doing a pair of 15mm spacers upfront.
@Bimmerguyunfortunately for standard C124’s and W124’s the rear doesn’t allow for wide wheels and low offsets. . It will have a slight poke unless you lower the vehicle and stretched tires. I hope that makes sense and answers your question. So yes they will fit, but with slight poke.
Hello everyone. Welcome to the listing! If you are interested in the OZ 3PC AMG wheels but just are too expensive, this is your time to purchase! Shipping across North America will only come to roughly - $250-$300 USD!
@kicinsky23yes
@strictlybizshipping to all states are roughly $600 USD. Which state are you from? I can get you a more accurate quote. For privacy reasons would not like to disclose address. They are in Langley BC Canada.
@Eyedoc1985 they are polished. But extremely old and tired. Not machined.
@JohnnyS6yes one rear has a crack. And description states it
@Fmj1979around $700 USD. Just estimated online.
@pinballer congratulations on the win! We will be in touch. Nice war.
This is a real bidding war! I need some photos of the wheels to whomever the winner is!
Not the $50!
That’s the knock out bid!
2 minutes left! Start the bidding war, don’t let it go!
@Porschecarlhey Carl!! Nope! That would be an absolute beauty combination. It would fit perfectly.
Approaching the last few hours…don’t miss out! Shipping all across U.S is/should only be around $500. For the set.
@SDcarnerdunfortunately I don’t have photos of these exact wheels, however the fitment will be perfect! If you punch in “R107 Amg aero 3's” on google, you’ll see exactly what it’ll look like, but the front wheels will be pushed closer to the fenders and look stellar!
@MBFahrergreat question! The material of our wheels are all 6061 T-6 aluminum. Which is the strongest, most light weight, and durable material used for wheels. Otherwise known as “FORGED WHEELS”. Where we differ from the old school aero III’s is our barrels and lips are also FORGED! OEM areo 3’s would have been alloy not aluminum. The technology from the 80’s have differed a lot. Although the faces are the same material, the way they are tested and created are much different. Made from a single piece of block and CC’d to shape + the crazy amounts of strain and testing put onto the wheels results in a lifetime of structural integrity. Again, all this information can be found on our website nlwforged.com. You are paying fraction of the cost of aero 3’s while getting “BETTER” wheels. Of course fitment is much better too. Rears are 10j et17 which AMG nailed right on the head. However the front 8.5j et18 was very conservative, pushing the wheel very much inside of the wheel well. Our 8j et+5 allows the front wheel to be pushed to the edge of the wheel well flush like the rear, with no rubbing. Thanks, any questions please ask.
@kokolomoush hello 👋 No the front 8j ET+5 is not a typo. The OEM 8.5j et+18 is a very conservative offset. It is not flush to the fenders. It does not do justice to the fitment. With the ET+5 it pushes the wheel out another 19mm, which allows the wheel to be perfectly flush with the fender for all applications mentioned. However, for the rear OEM 10j ET+17 is perfect. It is flush to the fenders so we have kept the rears the same. Thank you for the interest! :)
@zygattoroughly $500! Please see my latest comment regarding how you can get the exact price.
Hey guys, welcome to my auction for these beautiful wheels. I will assist buyer in shipping the wheels or arranging pickup. Local pickup is available in Vancouver BC. I own NLW Forged we create 100% forged wheels which are also 100% customizable in every way, if you have any questions regarding the materials or how they are made, you can visit nlwforged.com or send me a message! They are made much better than the original OZ 3PC wheels in every aspect. Newer times, newer technology! Shipping to the USA would be roughly $500 including cost of packaging supplies with UPS As for this auction, I can ship anywhere at buyers cost, you can go to UPS or your preferred shipper and put in these measurements for an estimate. Shipped from; V2Z 1K7 Langley, BC Canada Rear wheels: 26.6” x 26.6” x 11.5” WEIGHT: 55LBS Front wheels: 26.3” x 26.3” x 10” WEIGHT: 45LBS Happy bidding and please contact me via "Message seller" tab with any questions Thank you
Approaching the last 12 hours of the auction. Once again, if you have any questions let me know. The vehicle is absolute perfect condition. With warranty until June 2025, and extended warranty purchasable for roughly $7000 CAD - $4950 USD.
@silverarrow63 yes this will for the W116 chassis aswell!
@Ndume254 @unclefred1 Yes, these also fit the R129 chassis absolutely perfectly. These wheels are perfect for all W126, C126, R129 and R107.
Just a reminder that the tariffs does not affect this vehicle as its manufacturer origin is Germany. If there’s any questions about the import or transportation please reach out to me as soon as possible. I am happy to answer or assist.
For all interested US bidders. It would be a good idea to import as the US dollar is high. Now is the time. All high performance / rare vehicles are being imported now because of the exchange rate at the moment. Take advantage.
Hi! Owner of NLW here; Amrit Thank you @Ndume254 for the shoutout on the manufacturing. It will be interesting how much these wheels go for as they are very expensive to manufacture! If any interested buyers have any questions you can ask, 100% FORGED wheels made from 6061 T-6 Aluminum. Nlwforged.com
@Starkermann hey, do you mean import to the “US” ? If so, yes! 100% possible and very easy to do so. All you need is to get a broker who will go through the process for you.
@TKS77haha, I know it’s sort of a bummer! I am very happy to be listing the vehicle on the MBmarket but I also understand they may stop some bidders from bidding. However importing the vehicle to the US is not as hard as some may perceive it to be. The cost isn’t much either! You can do easy research and get an estimate from brokers to see how much it would be. Also, as for the shipping cost, THEMBMARKET can help ship the vehicle as you can get an estimated shipping quote above ^ Bid now while you have the chance!
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
2008 Mercedes-Benz CL63 AMG
Amritrana87 said:
Hello everyone, I just wanted to thank everyone that is interested and or bid/commented thus far. I also want to address something I just realized was not Addressed in the listing. I had mentioned them to MB market, but I believe they were left out by accident. First thing., as you can see from the records the engine mounts were replaced less than 15,000 km ago however they were replaced with a much stiffer/more rigid engine mounts meaning when the engine ask for a few movements, they become a little restricted, this causes a small amount of vibration at around 2000 RPM before the harmonic balancer kicks in. It is nothing to worry about it is very minor and I have the mechanics report if needed. Lastly, very simple: the valve covers are leak leaking. They are leaking a little bit, but I still want to mention it. The reason for it not being done already is I’m just going to see if the car can sell as is as the reserve is set relatively low. Thank you everyone. I wish everyone could see this car in person because it is a true beauty from the interior to the exterior in no way does it show over “ 10,000 km the seats, especially the rear seats show nowhere I think no one has ever sat in the rear. It cruises down the highway at ridiculous speeds with butter like smoothness. Thank you all happy bidding.2008 Mercedes-Benz CL63 AMG
Amritrana87 said:
@DLL58yes. TFX had told me there aren’t any 25% tariffs on Mercedes Benz vehicles, and also, the vehicle tariffs that have the 25% apparently start on May 2nd. Regardless, any potential US buyers, so most likely everyone, beware of this situation and please do some research or call TFX International for all info. I don’t think there is tariffs on this car.2008 Mercedes-Benz CL63 AMG
Amritrana87 said:
@DLL58 oof! I hope I am correct. I gave a call to TFX and they mentioned it will not affect the car and 25% tariffs are not applied to this car. I hope so as I’m sure majority of buyers are from US. We shall see. If you are correct, a lot of people will be screwed over :/2008 Mercedes-Benz CL63 AMG
Amritrana87 said:
@Motts71it can easily be changed in the settings. It changes the speedometer numbers to miles aswell. It is all digital.2008 Mercedes-Benz CL63 AMG
Amritrana87 said:
@DLL58only on US/Can made cars. All US/Canada (depending if you are in Canada or USA) made cars will face 25% tariffs. Mercedes Benz cars being made in Germany are exempt from the 25% tariffs.2008 Mercedes-Benz CL63 AMG
Amritrana87 said:
Welcome to my auction of this spectacularly optioned, very clean, CL63. I am proud to be handling the sale on MBMARKET. Extensive amount of work, time and money has gone into this vehicle for it to be where it is, the attention to detail is truly tremendous. I wanted to address a few things. – Canadian buyers will pay 5% GST + provincial sales tax if applicable – For American buyers, since IT IS A USA vehicle importing back into the US is straightforward and no taxes or fees are levied on the Canadian side. The car does not need any modification to meet USA standards. (Car was left into the USA standard when imported, system still in Fahrenheit) – Current import costs are: a 2.5% duty and a few hundred dollars in broker fees. TFX International will ship it to you, and their in-house broker will handle all the paperwork. You can request a quote from them here https://www.tfxinternational.com/ It can take them a couple of days for them to respond so it’s best to get in touch with them early. It drives like the day it drove off the lot. Thank you, and let’s see who takes this beast home.Custom 17" Aero III-style Wheels
Amritrana87 said:
@APSloan1I think the perfect tire set up for these Wheels would be 275/40/17 rear || 235/45/17 . You will still have lots of sidewall and the perfect stance. The ride will not be affected.Custom 17" Aero III-style Wheels
Amritrana87 said:
@superfuturaI am the owner of NLW FORGED and made these wheels myself. They’re not the Chinese performa brand. Just a custom wheel based off of a very popular OZ design that’s more cost effective and not prone to cracking. Perfect for those who don’t went to spend an arm and leg for this design.Custom 17" Aero III-style Wheels
Amritrana87 said:
@Fenouzno spacers are not needed for W126’s. Unfortunately not on this set, it is not possible to customize as it is a CAST wheelCustom 17" Aero III-style Wheels
Amritrana87 said:
@SGMotorsportsno lugs provided. They are BALL SEAT lugs. Local pickup is definitely possible!Custom 17" Aero III-style Wheels
Amritrana87 said:
@TimTyes i can ship anywhere! Shipping across North America isn’t much. Should be roughly $200-$250 for the set.Custom 17" Aero III-style Wheels
Amritrana87 said:
@TimThi Tim! I just checked. Good news. They will for your CLK55 perfectly!! The fitment will actually be very good, almost flush to the fenders, and you will not have any issues. I would suggest doing 255/40/17 rear and 225/45/17 front.Custom 17" Aero III-style Wheels
Amritrana87 said:
@Kevallinothe R107 would not need spacers to fit these wheels. However if you are looking for the best fitment, we would suggest doing a pair of 15mm spacers upfront.Custom 17" Aero III-style Wheels
Amritrana87 said:
@Bimmerguyunfortunately for standard C124’s and W124’s the rear doesn’t allow for wide wheels and low offsets. . It will have a slight poke unless you lower the vehicle and stretched tires. I hope that makes sense and answers your question. So yes they will fit, but with slight poke.Custom 17" Aero III-style Wheels
Amritrana87 said:
Hello everyone. Welcome to the listing! If you are interested in the OZ 3PC AMG wheels but just are too expensive, this is your time to purchase! Shipping across North America will only come to roughly - $250-$300 USD!Staggered 3-piece 17" AMG Aero III Wheels by OZ Racing
Amritrana87 said:
@kicinsky23yesStaggered 3-piece 17" AMG Aero III Wheels by OZ Racing
Amritrana87 said:
@strictlybizshipping to all states are roughly $600 USD. Which state are you from? I can get you a more accurate quote. For privacy reasons would not like to disclose address. They are in Langley BC Canada.Staggered 3-piece 17" AMG Aero III Wheels by OZ Racing
Amritrana87 said:
@Eyedoc1985 they are polished. But extremely old and tired. Not machined.Staggered 3-piece 17" AMG Aero III Wheels by OZ Racing
Amritrana87 said:
@JohnnyS6yes one rear has a crack. And description states itStaggered 3-piece 17" AMG Aero III Wheels by OZ Racing
Amritrana87 said:
@Fmj1979around $700 USD. Just estimated online.Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
@pinballer congratulations on the win! We will be in touch. Nice war.Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
This is a real bidding war! I need some photos of the wheels to whomever the winner is!Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
Not the $50!Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
That’s the knock out bid!Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
2 minutes left! Start the bidding war, don’t let it go!Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
@Porschecarlhey Carl!! Nope! That would be an absolute beauty combination. It would fit perfectly.Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
Approaching the last few hours…don’t miss out! Shipping all across U.S is/should only be around $500. For the set.Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
@SDcarnerdunfortunately I don’t have photos of these exact wheels, however the fitment will be perfect! If you punch in “R107 Amg aero 3's” on google, you’ll see exactly what it’ll look like, but the front wheels will be pushed closer to the fenders and look stellar!Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
@MBFahrergreat question! The material of our wheels are all 6061 T-6 aluminum. Which is the strongest, most light weight, and durable material used for wheels. Otherwise known as “FORGED WHEELS”. Where we differ from the old school aero III’s is our barrels and lips are also FORGED! OEM areo 3’s would have been alloy not aluminum. The technology from the 80’s have differed a lot. Although the faces are the same material, the way they are tested and created are much different. Made from a single piece of block and CC’d to shape + the crazy amounts of strain and testing put onto the wheels results in a lifetime of structural integrity. Again, all this information can be found on our website nlwforged.com. You are paying fraction of the cost of aero 3’s while getting “BETTER” wheels. Of course fitment is much better too. Rears are 10j et17 which AMG nailed right on the head. However the front 8.5j et18 was very conservative, pushing the wheel very much inside of the wheel well. Our 8j et+5 allows the front wheel to be pushed to the edge of the wheel well flush like the rear, with no rubbing. Thanks, any questions please ask.Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
@kokolomoush hello 👋 No the front 8j ET+5 is not a typo. The OEM 8.5j et+18 is a very conservative offset. It is not flush to the fenders. It does not do justice to the fitment. With the ET+5 it pushes the wheel out another 19mm, which allows the wheel to be perfectly flush with the fender for all applications mentioned. However, for the rear OEM 10j ET+17 is perfect. It is flush to the fenders so we have kept the rears the same. Thank you for the interest! :)Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
@zygattoroughly $500! Please see my latest comment regarding how you can get the exact price.Custom Forged 2-Piece 17" Aero III-style Wheels
Amritrana87 said:
Hey guys, welcome to my auction for these beautiful wheels. I will assist buyer in shipping the wheels or arranging pickup. Local pickup is available in Vancouver BC. I own NLW Forged we create 100% forged wheels which are also 100% customizable in every way, if you have any questions regarding the materials or how they are made, you can visit nlwforged.com or send me a message! They are made much better than the original OZ 3PC wheels in every aspect. Newer times, newer technology! Shipping to the USA would be roughly $500 including cost of packaging supplies with UPS As for this auction, I can ship anywhere at buyers cost, you can go to UPS or your preferred shipper and put in these measurements for an estimate. Shipped from; V2Z 1K7 Langley, BC Canada Rear wheels: 26.6” x 26.6” x 11.5” WEIGHT: 55LBS Front wheels: 26.3” x 26.3” x 10” WEIGHT: 45LBS Happy bidding and please contact me via "Message seller" tab with any questions Thank youOne-Owner 2021 Mercedes-AMG E63 S
Amritrana87 said:
Approaching the last 12 hours of the auction. Once again, if you have any questions let me know. The vehicle is absolute perfect condition. With warranty until June 2025, and extended warranty purchasable for roughly $7000 CAD - $4950 USD.Custom Forged 2-Piece 18" Gullideckel-style Wheels
Amritrana87 said:
@silverarrow63 yes this will for the W116 chassis aswell!Custom Forged 2-Piece 18" Gullideckel-style Wheels
Amritrana87 said:
@Ndume254 @unclefred1 Yes, these also fit the R129 chassis absolutely perfectly. These wheels are perfect for all W126, C126, R129 and R107.One-Owner 2021 Mercedes-AMG E63 S
Amritrana87 said:
Just a reminder that the tariffs does not affect this vehicle as its manufacturer origin is Germany. If there’s any questions about the import or transportation please reach out to me as soon as possible. I am happy to answer or assist.One-Owner 2021 Mercedes-AMG E63 S
Amritrana87 said:
For all interested US bidders. It would be a good idea to import as the US dollar is high. Now is the time. All high performance / rare vehicles are being imported now because of the exchange rate at the moment. Take advantage.Custom Forged 2-Piece 18" Gullideckel-style Wheels
Amritrana87 said:
Hi! Owner of NLW here; Amrit Thank you @Ndume254 for the shoutout on the manufacturing. It will be interesting how much these wheels go for as they are very expensive to manufacture! If any interested buyers have any questions you can ask, 100% FORGED wheels made from 6061 T-6 Aluminum. Nlwforged.comOne-Owner 2021 Mercedes-AMG E63 S
Amritrana87 said:
@Starkermann hey, do you mean import to the “US” ? If so, yes! 100% possible and very easy to do so. All you need is to get a broker who will go through the process for you.One-Owner 2021 Mercedes-AMG E63 S
Amritrana87 said:
@TKS77haha, I know it’s sort of a bummer! I am very happy to be listing the vehicle on the MBmarket but I also understand they may stop some bidders from bidding. However importing the vehicle to the US is not as hard as some may perceive it to be. The cost isn’t much either! You can do easy research and get an estimate from brokers to see how much it would be. Also, as for the shipping cost, THEMBMARKET can help ship the vehicle as you can get an estimated shipping quote above ^ Bid now while you have the chance!