These 17″ Aero II AMG Monoblock wheels measure 7.5″ in width all around and were manufactured by Mercedes-Benz for use on W124 vehicles including the sedan, wagon, coupe and cabriolet. The faces are finished in silver with machined lips and show AMG HWA124 stamped part numbers on the back. Dimensions, offsets, and other manufacturer casting marks are present on each wheel and four OEM Mercedes-Benz center caps are included. Each wheel has been professionally refinished in preparation for the sale. These rare W124 AMG monoblock wheels are now offered by the seller in Boca Raton, Florida.
These 5-hole monoblock Aero II wheels were originally designed for a W124 AMG by the factory and feature silver painted faces with machined lips. The AMG logo is seen engraved on each face and detailed photos are provided in the gallery.
Each wheel measures 7.5" wide with an offset of +42 and show part number HWA 124 401 03 02 on the back of each wheel. All four wheels feature a 5x112mm bolt pattern. The seller states the wheels are verified to be straight and true, and free of cracks, bends or welds.
These factory Mercedes-Benz wheels are one of the rarest versions to find with HWA124 part numbers. These AMG monoblock wheels are now offered by the seller with OEM Mercedes-Benz center caps in Boca Raton, FL.
A video showing the faces of each wheel is viewable below.
Get the best of The MB Market directly in your inbox every day. Subscribe for a curated list of our top market listings and articles!
16 Comments
Will the seller assist in having the wheels professionally packaged, insured and shipped? Thank You!$1,000 bid placed by @s14driftkid
$850 bid placed by @Superseller
$800 bid placed by @s14driftkid
$450 bid placed by @Sharpshooter007
$400 bid placed by @JGarrity
Thanks for the kind words @Jonie13. Yes these wheels are a sure fit on the W124 sedan, wagon, and cabriolet. I would like to reiterate that the only W124 Models that this set does not properly fit on is the 500E and the E420. These models have a wider wheel arch. I found a great example of a 1993 400E that has this particular set on the car. The stance looks proper and I will upload a couple photos to show everyone how the setup looks.I have this same part number set in my 1995 e320 which I’m currently selling. They are the perfect fit for non e500e 124’s. I used to own a 1995 e420 with the square set of C36 front wheels and they rubbed slightly on the fenders under hard driving (car was lowered on H&R springs. This set looks super nice. I would encourage anyone with a regular 124 to bid. Fit is perfect! GLWTS!Thanks to all who helped me understand what fits and what doesn't.Apologize meant to say E420 instead of 400E.After some great conversation about the fitment of these wheels on the 500E & 400E I can now thank and confirm with @gsxr and @BlueridgeMB. This set does not belong on this particular model. The French W124 fitment chart provided by @gsxr proves this to be true. The 17” Monoblocks that do fit are the 17x8.5 ET30 set. My Mercedes fitment chart also states that the 8.5 wheels fit the “Widewheel arch” under the W124 section. https://www.alloywheelsdirect.net/information/fitting_chart/mercedes-benz. Other than the 500 and 400E, this set is a direct fit on all other W124 models.Hi @gsxr. Thanks for clearing things up. I was under the impression that this set fit the 500E without any clearance issues. The 8 hole OEM wheels measure 16x8 ET34. The 17” Monos used on 500E measure 17x8.5 ET30. Based on the fenders of the 500E, you helped me understand that the stance looks correct with a wider wheel and smaller offset. @Jim_Rosenthal. I think at the end of the day this set can fit your car, but its stance will look out of place.This clarifying comment is most welcome. Thank you.@BlueridgeMB is correct. These wheels are 7.5" wide, which is narrower than the stock 8.0"-wide 500E wheels, and therefore these wheels would be a downgrade on any E500E. Also, because they are narrower AND also nearly 10mm different offset, these wheels will sit much too far inward in the fender wells, and would look awful unless you used 15-25mm spacers on all four corners. The part number prefix is irrelevant, Mercedes shared parts across multiple different chassis. @Jim_Rosenthal, click the link below to a Mercedes wheel brochure. These wheels are found in the top/center section, AMG monobloc (II), under the accessory part number B6-602-0086. See the column Rem. (Remark/Footnote), #6, which says in French "Not for E420 and E500". https://www.w124performance.com/images/W124_wheels/124_OE_wheel_chart.jpg These 17x7.5 ET42 wheels are a perfect fitment for all other 124 chassis except the widebody E500E.So these wheels in fact would not fit on my 1992 500E? There is nothing wrong with the 8-hole wheels I have, which are original. I just think the AMG wheels look better.@BlueridgeMB. Thank you for your insight that is good to know. From doing some research on the MB Forums people who run 17s on the 500E/E500 W124 models use 4 of the W202 rears which measure 17x8.5 ET30. While this looks pleasing and fits fine, the part number starts with 202 and not 124. The offset of this set is ET42. According to the Mercedes Benz Fitment Chart, these wheels will fit all W124 makes and models including the 500E. On the 500E Forum, examples of 17s on the car were all W202 Monoblocks which makes this set rare to find on a 500E.@Jim_Rosenthal These fit narrow/standard body 124's perfectly. 036's, no. You would want the 17x8.5 for your car Jim. These narrow body sets are getting harder to come by fwiw though!Sure thing @Jim_Rosenthal. Don’t miss out on this set because they do not come around very often.Thank you. Much appreciated.Hi @Jim_Rosenthal. This set is specifically designed for the W124 which includes your 500E. These wheels have the 124 part number which means it is a direct fit that does not require spacers.Would these wheels fit on a 500E, without spacers? Thank you.